水环境中RH-5992液相色谱分析

为评价ＲＨ－５９９２在环境中的分布与结局,介绍了一种该化合物在湖水,淤泥,鱼,宽叶香蒲草和驴蹄草的残留时分析方法,分析过程包括溶剂的提取,液液分配,柱层析净化和液相色谱分析。分析物采用二有管阵列式紫外检测器进行检测,柱型为ＲＰ－８,流动相为乙腈,二氧六环和水。     

Impacts of hunting on tropical forests in Southeast Asia

Although deforestation and forest degradation have long been considered the most significant threats to tropical biodiversity, across Southeast Asia (Northeast India, Indochina, Sundaland, Philippines) substantial areas of natural habitat have few wild animals (>1 kg), bar a few hunting‐tolerant species. To document hunting impacts on vertebrate populations regionally, we conducted an extensive literature review, including papers in local journals and reports of governmental and nongovernmental agencies. Evidence from multiple sites indicated animal populations declined precipitously across the region since approximately 1980, and many species are now extirpated from substantial portions of their former ranges. Hunting is by far the greatest immediate threat to the survival of most of the region's endangered vertebrates. Causes of recent overhunting include improved access to forests and markets, improved hunting technology, and escalating demand for wild meat, wildlife‐derived medicinal products, and wild animals as pets. Although hunters often take common species, such as pigs or rats, for their own consumption, they take rarer species opportunistically and sell surplus meat and commercially valuable products. There is also widespread targeted hunting of high‐value species. Consequently, as currently practiced, hunting cannot be considered sustainable anywhere in the region, and in most places enforcement of protected‐area and protected‐species legislation is weak. The international community's focus on cross‐border trade fails to address overexploitation of wildlife because hunting and the sale of wild meat is largely a local issue and most of the harvest is consumed in villages, rural towns, and nearby cities. In addition to improved enforcement, efforts to engage hunters and manage wildlife populations through sustainable hunting practices are urgently needed. Unless there is a step change in efforts to reduce wildlife exploitation to sustainable levels, the region will likely lose most of its iconic species, and many others besides, within the next few years.     

Political transition and emergent forest‐conservation issues in Myanmar

Political and economic transitions have had substantial impacts on forest conservation. Where transitions are underway or anticipated, historical precedent and methods for systematically assessing future trends should be used to anticipate likely threats to forest conservation and design appropriate and prescient policy measures to counteract them. Myanmar is transitioning from an authoritarian, centralized state with a highly regulated economy to a more decentralized and economically liberal democracy and is working to end a long‐running civil war. With these transitions in mind, we used a horizon‐scanning approach to assess the 40 emerging issues most affecting Myanmar's forests, including internal conflict, land‐tenure insecurity, large‐scale agricultural development, demise of state timber enterprises, shortfalls in government revenue and capacity, and opening of new deforestation frontiers with new roads, mines, and hydroelectric dams. Averting these threats will require, for example, overhauling governance models, building capacity, improving infrastructure‐ and energy‐project planning, and reforming land‐tenure and environmental‐protection laws. Although challenges to conservation in Myanmar are daunting, the political transition offers an opportunity for conservationists and researchers to help shape a future that enhances Myanmar's social, economic, and environmental potential while learning and applying lessons from other countries. Our approach and results are relevant to other countries undergoing similar transitions.     

Mathematical model for abrasive content estimation in a pulse-electroplated abrasive microtool

A mathematical model was developed to estimate the weight percent of diamond abrasive particles incorporated in nickel binder matrix during abrasive microtool fabrication by pulse-plating process. The proposed model is based on the hypothesis that, embedment of an inert micro abrasive diamond particle on the substrate will only occur when a few nickel ions from the adsorbed ionic cloud are chemically reduced at the cathode by hydrogen ions present in the diffusion layer. Experimental verification of the model developed was performed by pulse electroplating of diamond abrasive particles on tungsten micro tool shank using an in-house built experimental setup. The predictive model developed was found to estimate diamond abrasive content in nickel binder matrix within 1–7 wt% of experimental results for different pulse-plating conditions.     

Droplet size spectra and deposits of Bacillus thuringiensis aerial sprays,following application at two volume rates over an oak forest

Abstract

Dipel® 8AF, a commercial formulation of Bacillus thuringiensis (B.t.) was sprayed undiluted at 30 BIU in 1.8L/ha over a block B1, and sprayed after dilution with water at 30 BIU in 6.2 L/ha over another block B2 in an oak forest infested with the gypsy moth (Lymantria dispar L.) in southeastern Ontario, Canada. Spray was applied in May 1987 using a Cessna 188 Agtruck aircraft equipped with four Hicronair^® AU4000 atomizers. Droplet sizes were measured at mid‐canopy level of oak trees and at ground level using cylindrical Kromekote® cards. Deposit per unit area was assessed on aluminum oak leaves.

At the lower volume rate of 1.8 L/ha, spray droplets were smaller and droplets/cm² were lower on the cylindrical Kromekote cards in B1 than those obtained in B2 which received the higher volume rate of 6.2 L/ha. The average deposit per unit area of the aluminum oak leaves, expressed in nL of the spray volume per cm² surface area, was also correspondingly lower in B1 than in B2. This was attributed to the higher volume rate of spray application used in B2 than in B1, which resulted in larger droplets and a greater volume deposit/cm² in B2.     

Effect of additives in the Neem formulations on deposition,volatilization and persistence of Azadirachtin in spruce foliage

Abstract

Foliar deposits, volatilization and persistence of azadirachtin‐A (AZ‐A) were investigated after application of four spray mixes prepared from a wettable powder (WP) and three emulsifiable concentrate (EC) formulations of neem. They were applied at the dosage rate of 50 g AI in 4 L/ha onto potted spruce seedlings in a laboratory spray chamber. Droplet‐size spectra and deposits were assessed using Kromekote^® card/glass plate collection units. Foliar residues [dislodgeable residues (DR), penetrated residues (PR) and total residues (TR)] of AZ‐A and their volatilization were measured by HPLC at different intervals of time up to 60 h after treatment. Differences in the droplet‐size spectra and deposit levels were observed among the four spray mixes due to the influence of additives present in them. Dissipation half‐lives (DT₅₀) of the DR, PR and TR in the foliage were low (range, 19.5 to 38.9 h) and varied according to the residue type and the spray mix used. The DT₅₀ values of the DR were consistently lower (range, 19.5 to 31.9 h) than those of the PR (range, 30.5 to 38.9 h) due to preferential loss of the surface residues. The low DT₅₀ values observed for the DR and TR in the foliage sprayed with the WP spray mix were attributed to the particulate nature of the deposit. AZ‐A volatilized appreciably from the DR rather than from the PR. The variations found in the amounts of AZ‐A volatilized (42 to 58%) and unaccountable (38 to 46%) from the initial TR values in spruce foliage, after 60 h, were attributed to the physical form of the deposits on the target surface and the influences of additives present in the different spray mixes.     

Droplet size spectra and deposits of two aerially sprayed Bacillus thuringiensis formulations on artificial samplers and live foliage

Abstract

Two commercial formulations of Bacillus thuringiensis var. kurstaki (BTK), Foray^® 48B and Thuricide^® 48LV, were applied aerially over nine spray blocks in a hardwood forest in West Virginia in 1991. Droplet spectra and spray mass deposits were determined using water‐sensitive paper strips (WSPS), glass micro‐fiber filters (GMFFs), glass plates and castor oil. Mass deposits of BTK were also assessed on natural foliage by two bioassay methods, i.e., feeding of homogenized foliage containing a starch‐sucrose solution and force‐feeding bioassay of foliar extracts containing re‐dissolved protein precipitate. Deposits on canopy foliage and ground samplers were also assessed by total protein assay and enzyme‐linked immunosorbent assay (ELISA). Droplet spectra on the WSPS were different from those on castor oil. Droplets on horizontal ground WSPS were larger than those on vertical ground WSPS. WSPS placed at canopy level collected more droplets than those at ground level. The total protein deposits (ng/cm²) were consistently higher on all blocks than the delta‐endotoxin protein deposits. Spray mass recovery on the ground samplers were low, and ranged from 2.9 to 8.0% of the applied rates.     

Assessment of aerial spray deposits in a spruce forest using in‐flight microencapsulation technique

Abstract

Spray drops were counted and sized on Kromekote® cards at ground level, and on spruce foliage at canopy level, after aerial application of a formulation containing a microencapsulation medium, over a spruce forest in Ontario. The majority of drops (70%) on foliage was 20 ‐ 75 µm range. A coarse drop size spectrum was observed on cards with a maximum diameter (Dmax) of 380 µm, and with 85% of the drops = 130 µm in diameter. Foliar drop analysis, on the other hand, indicated a finer spectrum with a Dmax of 150 µm, and with 85% of the drops = 75 µm. These results were explained on the basis of formulation ingredients, atomizer setting, weather factors, and drop retention on target surfaces. The assessment of spray deposits on glass plates at ground level indicated that about 16% of the applied spray volume reached the forest floor, a value which is comparable to those obtained in previous forestry applications using the ultra‐low‐volume (ULV) technique.     

Droplet trajectories and deposition with an airblast forestry sprayer

Abstract

The characteristics of the air pattern and spray droplet trajectories from the Algonquin airblast forestry sprayer were investigated. An experiment with water and Rhodamine tracer dye was conducted in a shelterwood location to evaluate droplet deposition on Kromekote^® card targets above and within a canopy of poplar saplings. Computer simulation of a free jet was used to model the airblast in order to investigate droplet trajectories. Measured deposits indicated that the effective swath width is 14 m from the blower outlet. Mean simulated droplet trajectory data were in good agreement with the droplet density data observed in the field. Both sets of results predicted a very low level of spray deposition beyond 14 m.     

Influence of additives in the end‐use mixes of tebufenozide on deposition,adhesion and persistence in spruce foliage

Abstract

A commercial flowable formulation of tebufenozide, RH‐5992 2F [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyl) hydrazine], was diluted with water, water and canola oil, and water and the methyl ester of canola oil, to provide six end‐use mixes with concentrations of 35 and 70 g of active ingredient (Al) litre^‐1. The mixes were applied at 70 and 140 g Al ha^‐1 over white spruce [Picea glauca (Moench) Voss] seedlings in a laboratory spray chamber and foliar concentrations of tebufenozide were determined over a 60‐d period. At intervals of time post‐spray, seedlings were sprayed with monosized droplets of Sunspray®11N as rainfall, and the amount of tebufenozide knocked off from foliage was determined. The potential energy of adhesion (PEA) of the Al particles on the foliage increased with time and varied according to the type of end‐use mix, its viscosity and the dosage sprayed.

The end‐use mixes were applied over white spruce trees under field conditions and persistence of tebufenozide was investigated. DT₅₀ values were influenced by the type of mix and dosage sprayed. Oil‐containing mixes and higher dosages increased the PEA of tebufenozide particles.